TBR تحذير

TBR WARNING

NOTE THESE ARE SAFETY PRECAUTIONS, NOT INTRODUCTIONS ON HOW TO MOUNT TIRES.

  • Only trained and experienced tire service personnel should undertake this hazardous work.
  • Always deflate tires completely before removing lock ring or side ring.
  • Always inspect and clean all rim parts before assembly.
  • Never use cracked, bent, dented, or badly rusted rim parts.
  • Always be sure that rim diameter and tire diameter are the same.
  • Always use new tubes and new flaps in new tires.
  • Always lubricate the base of the tube, the flap and beads as directed. Use only an approved lubricant.
  • Always ensure the tire interior is dry before mounting. Moisture inside a tire can damage the tire.
  • Never exceed 40 P.S.I to seat tire beads.
  • Always inflate tires in a safety cage or other restraint device.
  • Always use a clip-on chuck with gauge and an extension hose to inflate tires and stand away from the tire and rim while inflating.
  • After beads are seated, install valve core and inflate to recommended cold operating pressure.